How to install LED cabochon lamp?

There are certain steps to follow when installing led cabochon lamp to ensure it is safe, secure, and beautiful. Here is a detailed installation guide:

Prepare tools and materials

• Tools: screwdriver (including cross and flat), electric drill, tape measure, pencil, insulating tape, pliers, wiring caps, etc.
• Materials: led cabochon lamp, expansion screws or plastic expansion tubes (select according to the weight of the lamp), terminal or wiring cap, wire (if extended).

Determine the installation location and lamp size

• Choose a location: Choose a suitable location to install the led cabochon lamp, ensuring that the location can fully utilize the lighting effect and meet safety standards. Avoid installing on wet or flammable surfaces.
• Measure the size: Use a tape measure to measure the size of the location to ensure that the size of the selected lamp matches it. At the same time, check the fixing base and mounting holes of the lamp to ensure that it matches the installation location.

Remove the old lamp (if have)

• Turn off the power: Before installing the new lamp, be sure to turn off the main power switch to ensure safety.
• Remove the old lamp: Use tools such as screwdrivers to carefully remove the old lamp. Be careful to avoid damaging the surrounding walls or ceilings.

Install the new cabochon lamp

1. Drilling holes and installing the base:
   According to the fixed base and installation hole position of the lamp, use an electric drill to drill holes in the ceiling. The depth and diameter of the hole should be determined according to the selected expansion screw or plastic expansion tube.
   Insert the expansion screw or plastic expansion tube into the hole and fix it with a screwdriver. Make sure the screw or expansion tube is firmly installed on the ceiling.
   Align the fixed base of the lamp with the screw or expansion tube on the ceiling and tighten it with a screwdriver. Make sure the base is firmly installed and will not shake.
2. Connect the wires:
   Open the junction box of the lamp to expose the wire connector.
   Use pliers to peel the wires to expose the copper core.
   Connect the wires of the lamp to the reserved wires on the ceiling. You can use a terminal or a wiring cap to fix the wire connection, ensuring that the connection is firm and well insulated.
   Wrap the wiring with insulating tape to prevent leakage or short circuit.
3. Install the lamp body:
   Align the lamp body with the fixed base and fix it with a screwdriver or other tools. Make sure the lamp body is firmly installed and will not fall off or shake.
   If the lamp has a hanging ring or hanging hole, you can use screws to install the hanging ring on the main body of the lamp, and use a hanging belt or hanging chain to hang it from the ceiling.

Test and adjust

• Turn on the power: After completing the installation of the lamp, turn on the power to test. Make sure the lamp works properly without flickering or extinguishing.
• Adjust the light: Adjust the angle and brightness of the lamp as needed to achieve the best lighting effect.

Install the lampshade (if have)

• Install the lampshade: If the led cabochon lamp has a lampshade, you can install the lampshade on the main body of the lamp. Make sure the lampshade is installed firmly and will not fall off or shake.
• Check the installation: Finally, check the entire installation work to make sure everything meets the requirements and is safe and reliable.